SPECIAL!! Buy 50 and save 15%

Genuine TRESU Royse bag filter is a unique design. Not just a bag filter, the media-filled filter provides optimal filtration over time. This is the OEM original design made to work correctly with all TRESU Royse NOVA pumps used in TRESU Royse Space Saver and DWC units .

Old Part Number: 1181004701

Same As: 3045880

Genuine TRESU Royse filter bag is a unique design. Not just a bag, the media-filled filter provides optimal filtration over time. The Royse bag is not just an empty bag, it is media filled so that fountain solution deteriorates more slowly between filter changes. This is the OEM original design made to work correctly with the NOVA pump.

Old part number: 1181004701

Same as: 3045880

Compatibility:

SS3, SS5, SS10, SS20, SS30, and non riveted cabinet DWC3, DWC5, DWC10, DWC20, DWC30

Don't compromise!

Using only original TRESU Royse replacement parts and consumables assures optimum performance!

Old P/N: 8430187

 

Genuine TRESU Royse DWC air filters protect the DWC's condenser from becoming blocked  by pressroom dust and powder. Cooling efficiency, power consumption and compressor life are directly affected. TRESU Royse filters meet the factory designed specification for air flow and dirt removal. Change filters monthly for best results.

Compatibility:

Screw assembled cabinet DWC5, DWC10, DWC20, DWC30

Don't compromise!

Using only original TRESU Royse replacement parts and consumables assures optimum performance!

Special - Buy 20 save 15%. 

Genuine TRESU Royse DWC air filters protect the DWC's condenser from becoming blocked by pressroom dust and powder. Cooling efficiency, power consumption and compressor life are directly affected. TRESU Royse filters meet the factory designed specification for air flow and dirt removal. Replace filters monthly for best results.

Compatibility:

All screw type cabinet design DWC5, DWC10, DWC20 and DWC30 units. Old P/N 8430187

Don't compromise! Using only original TRESU Royse replacement parts and consumables assures optimum performance!

Conductivity monitoring kit for measuring undissolved particulates in the fountain solution for chemistry regulation. Alarm is activated when pre-set parameters are exceeded informing the press operator to change the fountain solution. 

Kit can be added to Tresu DWC's built between 2008 and April of 2022. Assembly plugs into the back panel of the DWC and is controlled by the front panel HMI unit.

In-line probe with titanium electrodes for long life. The unit measures conductivity from 900 to 6000 micro Siemens. The accuracy of the meter and probe is 2% of the full scale reading with a repeatability of 1%. If the sensor is open or the connections are broken, the screen will flash in alarm. Fountain solution conductivity values will vary depending on your printing application and procedures.

The DWC 5-1 is a refrigerated dampening water circulator intended for small duplicator and narrow format sheet-fed offset printing presses.  The cooling system uses 134a refrigerant with an absorption type heat-exchanger.  Dampening solution is re-circulated between the pan(s) on the press and the cooling reservoir within the DWC 5-1 by a high efficiency circulation pump.  The desired temperature setting is selected using a digital thermostat located in the control panel of the DWC 5-1 unit for easy access and operation.  This is a 115V unit.

The DWC 5-1 is a refrigerated dampening water circulator intended for small duplicator and narrow format sheet-fed offset printing presses.  The cooling system uses 134a refrigerant with an absorption type heat-exchanger.  Dampening solution is re-circulated between the pan(s) on the press and the cooling reservoir within the DWC 5-1 by a high efficiency circulation pump.  The desired temperature setting is selected using a digital thermostat located in the control panel of the DWC 5-1 unit for easy access and operation.   This is a 230V unit.

The DWC 10-1 is a refrigerated dampening water circulator intended for small duplicator and narrow format sheet-fed and web offset printing presses.  The cooling system uses 134a refrigerant with an absorption type heat-exchanger.  Dampening solution is re-circulated between the pan(s) on the press and the cooling reservoir within the DWC 10-1 by a high efficiency circulation pump.  The desired temperature setting is selected using a digital thermostat located in the control panel of the DWC 10-1 unit for easy access and operation.  This is a 115V unit.

The DWC 10-2 is a refrigerated dampening water circulator intended for small duplicator and narrow format sheet-fed and web offset printing presses.  The cooling system uses 134a refrigerant with an absorption type heat-exchanger.  Dampening solution is re-circulated between the pan(s) on the press and the cooling reservoir within the DWC 10-2 by 2 high efficiency circulation pumps.  The desired temperature setting is selected using a digital thermostat located in the control panel of the DWC 10-2 unit for easy access and operation.  This is a 115V unit.

The DWC 10-1 is a refrigerated dampening water circulator intended for small duplicator and narrow format sheet-fed and web offset printing presses.  The cooling system uses 134a refrigerant with an absorption type heat-exchanger.  Dampening solution is re-circulated between the pan(s) on the press and the cooling reservoir within the DWC 10-1 by a high efficiency circulation pump.  The desired temperature setting is selected using a digital thermostat located in the control panel of the DWC 10-1 unit for easy access and operation. This is a 230V unit.

The DWC 10-2 is a refrigerated dampening water circulator intended for small duplicator and narrow format sheet-fed and web offset printing presses.  The cooling system uses 134a refrigerant with an absorption type heat-exchanger.  Dampening solution is re-circulated between the pan(s) on the press and the cooling reservoir within the DWC 10-2 by (2) high efficiency circulation pumps.  The desired temperature setting is selected using a digital thermostat located in the control panel of the DWC 10-2 unit for easy access and operation.   This is a 230V unit.

The DWC 20-3 is a refrigerated dampening water circulator intended for ½ size and full size format sheet-fed and web offset printing presses.  The cooling system uses 134a refrigerant with an absorption type heat-exchanger.  Dampening solution is re-circulated between the pan(s) on the press and the cooling reservoir within the DWC 20-3 by 3 high efficiency circulation pumps.  The desired temperature setting is selected using a digital thermostat located in the control panel of the DWC 20-3 unit for easy access and operation.  This is a 230V unit.

The DWC 20-4 is a refrigerated dampening water circulator intended for ½ size and full size format sheet-fed and web offset printing presses.  The cooling system uses 134a refrigerant with an absorption type heat-exchanger.  Dampening solution is re-circulated between the pan(s) on the press and the cooling reservoir within the DWC 20-4 by 4 high efficiency circulation pumps.  The desired temperature setting is selected using a digital thermostat located in the control panel of the DWC 20-4 unit for easy access and operation.   This is a 230V unit.

The DWC 30-4 is a refrigerated dampening water circulator intended for ½ size and full size format sheet-fed and web offset printing presses.  The cooling system uses 134a refrigerant with an absorption type heat-exchanger.  Dampening solution is re-circulated between the pan(s) on the press and the cooling reservoir within the DWC 30-4 by 4 high efficiency circulation pumps.  The desired temperature setting is selected using a digital thermostat located in the control panel of the DWC 30-4 unit for easy access and operation.  This is a 230V unit.

The DWC 30-5 is a refrigerated dampening water circulator intended for ½ size and full size format sheet-fed and web offset printing presses.  The cooling system uses 134a refrigerant with an absorption type heat-exchanger.  Dampening solution is re-circulated between the pan(s) on the press and the cooling reservoir within the DWC 30-5 by 5 high efficiency circulation pumps.  The desired temperature setting is selected using a digital thermostat located in the control panel of the DWC 30-5 unit for easy access and operation.  This is a 230V unit.

The DWC 30-6 is a refrigerated dampening water circulator intended for ½ size and full size format sheet-fed and web offset printing presses.  The cooling system uses 134a refrigerant with an absorption type heat-exchanger.  Dampening solution is re-circulated between the pan(s) on the press and the cooling reservoir within the DWC 30-6 by 6 high efficiency circulation pumps.  The desired temperature setting is selected using a digital thermostat located in the control panel of the DWC 30-6 unit for easy access and operation.   This is a 230V unit.

The DWC 10EC-2 is a refrigerated dampening water circulator intended for small duplicator and narrow format sheet-fed and web offset printing presses.

The EC (extra capacity) version has a larger compressor for greater cooling capacity in a compact size. Works well in workshop environments with high temperatures or use with UV. 

The cooling system uses 134a refrigerant with an absorption type heat-exchanger.  Dampening solution is re-circulated between the pan(s) on the press and the cooling reservoir within the DWC 10EC-2 by (2) high efficiency circulation pumps.  The desired temperature setting is selected using a digital thermostat located in the control panel of the DWC 10EC-2 unit for easy access and operation.   This is a 230V unit.

The DWC 20EC-4  is a refrigerated dampening water circulator intended for ½ size and full size format sheet-fed and web offset printing presses. 

The EC (extra capacity) version has a larger compressor for greater cooling capacity in a medium size cabinet. Works well in workshop environments with high temperatures or use with UV. 

The cooling system uses 134a refrigerant with an absorption type heat-exchanger.  Dampening solution is re-circulated between the pan(s) on the press and the cooling reservoir within the DWC 20EC-4 by 4 high efficiency circulation pumps.  The desired temperature setting is selected using a digital thermostat located in the control panel of the DWC 20EC-4 unit for easy access and operation. 

The DWC 30EC-6  is a refrigerated dampening water circulator intended for ½ size and full size format sheet-fed and web offset printing presses. 

The EC (extra capacity) version has a larger compressor for greater cooling capacity in a standard size cabinet. Works well in workshop environments with high temperatures or use with UV. 

 The cooling system uses 134a refrigerant with an absorption type heat-exchanger.  Dampening solution is re-circulated between the pan(s) on the press and the cooling reservoir within the DWC 30EC-6 by 6 high efficiency circulation pumps.  The desired temperature setting is selected using a digital thermostat located in the control panel of the DWC 30EC-6 unit for easy access and operation.